Login LoginClose
| Lost password

Welcome to the PacesetterSucks Message Board!

Pacesetter Storm Door
  •  
 1
04/01/14 23:20
Kisota

not registered

Pacesetter Storm Door

Dear All,
Can someone tell me how to get the Bottom Part of the Storm Door out so you can clean it. This is just one more thing they didn't tell me.

Thanks
Kisota

04/01/14 23:20
Unknown

not registered

Re: Pacesetter Storm Door

In the track that the sliding glass runs in there are 2 metal "clips" on either side. Lift them up about 1/4 inch on both sides. Once you've done this you can remove the sliding glass portion by lifting up past the clips and moving the vent left or right then pulling towards you slowly. Simply reverse the process to reinstall and be sure to depress those clips you lifted earlier. If not, the vent will fall out and the next time you open your vent you will really be screwed.

04/01/14 23:20
Kisota

not registered

Re: Pacesetter Storm Door

Dear Unknown,
Thank you so much. Now. one more Question. One of the Metal sides came out of the Window, and the cord that holds the spring on it came loose ( the knot came untied. Can you tell me where it goes?)

Thanks so much

 1